AF-800 and AF-500 venetian blinds with 80 mm- or 50 mm-wide flat slats impress with their minimal heights of package and recess, allowing floor-to-ceiling windows and thus plenty of light. The flat, flexible slats ensure good visibility through the blind and offer increased resistance to deformation.
Both models are available with rail guidance and alternating guided slats, with cable guidance or combined wind-resistant rail and cable guidance (AF-840 only).
AF-800 and AF-500
Description
The self-supporting blind system with no mounting in the recess area preserves insulation, reduces noise transmission, and prevents thermal bridges (Minergie standard). A central attachment or a reinforcement profile is required for the head rail from widths of 2500 mm and above.
The flanged holes on the AC-800 prevent the 8 mm-wide lift tapes from fraying. Not using delicate plastic lugs avoids the need for premature repairs. The use of striker holes means that each slat is attached to the ladder cord in several places.
Minimal package heights and recess heights allow for floor-to-ceiling windows and thus plenty of light. This is also an ideal solution for mounting positions with little space for sun protection.
The slats are guided by metal guide bolts on side rails, alternating left and right.
The slats can either be guided on one side or on both sides with 3 mm-thick, PA-coated cables.
Metal guide bolts ensure durability and resistance to breakage (AF-500 model has plastic guide bolts).
For AF-800 and AF-830 only:
The innovative textured coating used for the slats demonstrates significantly better colour retention and weather resistance than the conventional smooth coating. Dirt adhesion is substantially reduced and the slats are easy to clean.
Venetian blinds can be fitted with electric drives for greater ease of operation. In conjunction with the corresponding controller, this meets the Minergie standard.
For AF-800 and AF-830 only:
The blind can be split into two or three sections with different slat inclines. Open slats in the upper section enable daylight to penetrate into the depths of the room, while closed slats in the lower section serve as glare protection for the window.
For AF-800 and AF-830 only:
Metal guide bolts, flanged holes for 8 mm-wide lift tapes, Kevlar-reinforced turning cords, cable guidance made from coated chrome steel, and slats with textured coating all ensure that the blinds will last for a long time.
Choose from around 5 standard colours, including a range of IGP and metallic colours. You can also choose from more than a thousand RAL, NCS and IGP colours.
The slats can either be guided on one side (e.g. for corner windows) or on both sides by filigree chrome steel cables (AF-830 and AF-530 models).
The combined cable/rail guidance system (AF-840 model) features additional cables, which means that the slats are in wind resistance class 6 (92 km/h, bk max. ≤ 3000 mm, hk max. ≤ 3500 mm, bk x hk ≤ 8 m²).
Height of opening (hl) | Height of recess (hs) AF-800 | Height of recess (hs) AF-500 |
---|---|---|
to 1750 mm | 145 mm | 130 mm |
1751 to 2000 mm | 150 mm | 140 mm |
2001 to 2250 mm | 155 mm | 150 mm |
2251 to 2500 mm | 165 mm | 155 mm |
2501 to 2750 mm | 170 mm | 160 mm |
2751 to 3000 mm | 180 mm | 170 mm |
3001 to 3250 mm | 185 mm | 175 mm |
3251 to 3500 mm | 195 mm | 180 mm |
3501 to 3750 mm | 200 mm | 190 mm |
3751 to 4000 mm | 210 mm | 200 mm |
4001 to 4250 mm | 215 mm | 205 mm |
with cover panel | + 20 mm | + 20 mm |
minimum | 400 mm | 400 mm |
maximum | 4250 mm | 4250 mm |
max. without warranty | 5500 mm | 5500 mm |
Construction width (bk)
min. with crank drive | 345 mm | 345 mm |
min. with motor drive | 480 mm | 480 mm |
maximum | 4000 mm | 4000 mm |
max. without warranty | 6000 mm | 5000 mm |
Area (bk x hl)
Single blinds | ||
max. with crank drive | 6 m2 | 6 m2 |
max. with motor drive | 10 m2 | 8 m2 |
coupled system | ||
max. with crank drive | 6 m2 | 6 m2 |
max. with motor drive | 24 m2 | 24 m2 |
max. coupled blinds | 3 pieces | 3 pieces |
Recess depth (ts)
minimum | 120 mm | 100 mm |
Wind resistance classes
bk < 1500 mm | class 5 | class 4 |
bk < 2000 mm | class 4 | class 3 |
bk < 2500 mm | class 3 | class 2 |
bk < 3000 mm | class 3 | class 2 |
bk < 3500 mm | class 2 | class 1 |
bk < 4000 mm | class 2 | class 1 |
Download PDF / CAD-File(dwg)
Note
It is possible that conversion errors occur during saving or importing into another CAD format. Our models are created with the utmost care and the specifications are checked for accuracy. However, we cannot assume liability for possibly faulty or incomplete specifications as well as the correct depiction of the product in your CAD system. We recommend checking all relevant installation dimensions according to the information from our brochure pages.
We recommend
checking all relevant installation dimensions according to the information from our brochure pages.