Brochure
AS-900 compound venetian blinds with 90 mm-wide, s-shaped slats
provide good dimming and individual light regulation. The elegant profile
allows for an aesthetically pleasing façade design.
AS-900 compound venetian blinds are available with rail guidance and guided slats on alternate or both
sides, with cable guidance or combined wind-resistant rail and cable guidance.
AS-900
Description
Optional self-supporting system
The self-supporting blind system with no
mounting in the recess area preserves insulation, reduces noise transmission, and prevents
thermal bridges (Minergie standard). A central
attachment or a reinforcement profile is required for the head rail from widths of 2500 mm
and above.
Protective holes
The flanged holes prevent the 8 mm-wide lift
tape from fraying. Not using delicate plastic lugs
avoids the need for premature repairs.
Metal instead of plastic
Metal guide bolts ensure durability and resistance to breakage.
The weatherproof chrome steel hooks attaching
the slats to the turning cords enable damaged
slats to be subsequently replaced.
Turning cords with precise folding
Kevlar-reinforced turning cords ensure precise
folding without sitting between the slats. This
achieves a minimal package height with parallel slat alignment. Dark slat colours can be
equipped with black turning cords and lift tapes
to prevent them from sticking out.
Cable guidance and combined cable/rail guidance
The slats can either be guided on one side or on both sides with 3 mm-thick, PA-coated cables. The combined cable/rail guidance system (AS-940) features additional cables, which means the slats are in wind resistance class 6.
End position stop
The bottom rail can be equipped with an end
position stop. In the closed end position, this
cannot be raised from the outside and thus
serves to prevent break-ins.
Textured coating
The innovative textured coating used for the slats demonstrates significantly better colour retention and weather resistance properties than the conventional smooth coating. Dirt adhesion is substantially reduced and the slats are easy to clean.
Automated convenience
Venetian blinds can be fitted with electric drives for greater ease of operation. In conjunction with the corresponding controller, this meets the Minergie standard.
Daylight use
The blind can be split into two or three sections
with different slat inclines. Open slats in the
upper section enable daylight to penetrate into
the depths of the room, while closed slats in
the lower section serve as glare protection for
the window.
Excellent materials
Weatherproof chrome steel slat hooks, metal guide bolts, flanged holes for 8mm-wide lift tapes, Kevlar-reinforced turning cords and slats with textured coating all ensure that the blinds will last for a long time.
Range of colours
Choose from around 25 standard colours, including a range of IGP and metallic colours. You can also choose from more than a thousand RAL, NCS and IGP colours.
| Height of opening (hl) | Height of recess (hs) AS-900 | |
|---|---|---|
| to 1750 mm | 220 mm | |
| 1751 to 2000 mm | 220 mm | |
| 2001 to 2250 mm | 235 mm | |
| 2251 to 2500 mm | 255 mm | |
| 2501 to 2750 mm | 270 mm | |
| 2751 to 3000 mm | 285 mm | |
| 3001 to 3250 mm | 300 mm | |
| 3251 to 3500 mm | 315 mm | |
| 3501 to 3750 mm | 330 mm | |
| 3751 to 4000 mm | 345 mm | |
| 4001 to 4250 mm | 360 mm | |
| with cover panel | + 20 mm | |
| minimum | 400 mm | |
| maximum | 4250 mm | |
| maximum without warranty | 5500 mm |
Width of installation (bk)
| min. with crank drive | 345 mm | |
| min. with motor drive | 480 mm | |
| max./max. without warranty | 4500 mm/6000 mm |
Area (bk x hl)
| Single blinds | ||
| max. with crank drive | 6 m2 | |
| max. with motor drive | 10 m2 | |
| coupled system | ||
| max. with crank drive | 6 m2 | |
| max. with motor drive | 24 m2 | |
| max. coupled blinds | 3 pieces |
Depth of recess (tn)
| minimum | 130 mm |
Wind resistance classes
| AS-900 | AS-940 | |
| bk < 1500 mm | class 6 | class 6 |
| bk < 2000 mm | class 6 | class 6 |
| bk < 2500 mm | class 5 | class 6 |
| bk < 3000 mm | class 4 | class 6 |
| bk < 3500 mm | class 4 | class 5 |
| bk < 4000 mm | class 4 | class 5 |
AS-900 Download PDF / CAD-File(dwg)
Installation on embrasure in recess
Self-supporting installation with cover panel type 1
Installation on facade with cover panel type 8
Recess for gear box
Crank drive
Crank drive
AV-700 Download PDF / CAD-File(dwg)
AS-940
Installation on embrasure in recess
Self-supporting installation with cover panel type 1
Installation on facade with cover panel type 8
Recess for gear box
Crank drive
Crank drive
Note
It is possible that conversion errors occur during saving or importing into another CAD format. Our models are created with the utmost care and the specifications are checked for accuracy. However, we cannot assume liability for possibly faulty or incomplete specifications as well as the correct depiction of the product in your CAD system. We recommend checking all relevant installation dimensions according to the information from our brochure pages.
We recommend
checking all relevant installation dimensions according to the information from our brochure pages.
